Quarterly Preventative Maintenance Inspection Routine
This document is intended as a guide to the quarterly inspection of skatepark equipment.

1. Check all structural bolts, fixing screws etc. Reaffix, replace, tighten as necessary.

2. Check the ground securing bolts for tightness, reaffix, replace as necessary.

3. Check all surfaces visually to ensure there is no damage that might cause a user to trip all slip.

4. Check all surfaces for signs of bonding failure/delamination.

5. Check all surface joints to ensure that no damage has been caused which might cause injury.

6. Check all toe plate's are in contact with the ground (or that any gap is less than 3mm).

7. Check the integrity of the railings and railing post’s.

8. Check (where ever visible) the welding of the structure.

9. Check for any slithers of galvanising or steel that may have been peeled back by the action of grinding and which might cause injury or damage.

10. Make sure the ground area is free of waste materials, and check for nails, broken glass, etc that would damage bike tyres.

11. Make sure that the surrounding fencing and gates are checked for damage that may cause injury.

12. Check for continued compliance with PAS 35: 2002

Click to download a printable version of this document

<< Back